Kitchen Cabinetry Built for Minnetonka Homes

Kitchen Cabinetry in Minnetonka homes

Minnetonka grew as a western suburb largely after the 1950s, and its neighborhoods around Glen Lake, Williston and Woodland mix mid-century and later-twentieth-century homes, many on wooded lots. Kitchens of that period tend to be compartmentalized and closed off from adjoining rooms.^[1]

Cabinetry is usually the largest single element replaced in a kitchen remodel. It comes up when doors sag or delaminate, when boxes have absorbed moisture, or when a layout wastes space with shallow uppers and dead corners that a modern cabinet system would use.

Garrett Kitchen Remodeling has carried out this work across Minnetonka neighborhoods including Tonka Bay, Deephaven, Williston, Glen Lake and Woodland. It is often done alongside kitchen design and kitchen countertops as part of a larger kitchen update.

What the work includes

The work starts by removing the old cabinets and inspecting the walls and floor behind them, since older homes often have out-of-plumb walls and uneven floors that affect how new cabinets hang. New boxes — framed, frameless or inset — are set to a level line, scribed to the wall and shimmed so face frames and doors align across the run. Fillers close gaps at walls and appliances; crown molding, light rails and toe-kick trim finish the tops and bases. Drawer boxes and hinges are adjusted so reveals are even and doors close softly. Where a cabinet carries a countertop seam or a farmhouse sink, the installer reinforces the box to carry the added weight. The job ends with hardware mounting and a pass to confirm every door and drawer operates cleanly. Cabinet installation also sets the datum for the countertop template, so accurate, level boxes are what make the counters and backsplash fit later.

The full scope, materials and process are described on the kitchen cabinetry service page, which applies to every city Garrett Kitchen Remodeling serves; this page focuses on how the work applies to Minnetonka.

Permits and inspection in Minnetonka

Kitchen work in Minnetonka is permitted and inspected by the City of Minnetonka building department under the Minnesota State Building Code. Replacing kitchen cabinetry within the existing footprint is often cosmetic and may not require a permit on its own, but any change to plumbing, wiring or structure that the work touches does. Garrett Kitchen Remodeling pulls the required permits, schedules each inspection, and carries Minnesota contractor license #BC785223 and general liability insurance.

Cost factors

The price of kitchen cabinetry in Minnetonka depends mainly on the following, and a written quote itemizes each one rather than using a single allowance:

• Stock, semi-custom or fully custom cabinet construction
• Box material — particleboard, plywood or solid wood
• The number of cabinets, specialty units and organizational inserts
• Scribing and shimming required to fit out-of-plumb walls in older homes

Common questions

Can I reface cabinets instead of replacing them in Minnetonka?

If the existing boxes are square and solid, refacing the doors and drawer fronts is an option. When boxes are water-damaged or the layout is changing, full replacement is the sounder choice.

How are cabinets fitted to uneven walls?

Each run is set to a level line, then scribed and shimmed so the face frames align even when the wall behind is not plumb — a common condition in older homes.

See also

• Other kitchen services in Minnetonka: Kitchen Design, Kitchen Countertops, Full Kitchen Remodel, Kitchen Structural Work, Kitchen Appliance Installation
• Kitchen Cabinetry in nearby cities: Edina, Bloomington
• Kitchen Cabinetry (all service areas) and the Minnetonka kitchen remodeling hub

References

1. Minnetonka, Minnesota — Wikipedia
2. Kitchen cabinet — Wikipedia